Manually Set Up Your Internet Connection - TP-Link Archer GE800 User Manual

Chapter 4
+
3. Tap the button and select
complete the setup and connect to the internet.
4. Connect your devices to the router's wireless network and enjoy the internet!
4 3

Manually Set Up Your Internet Connection

In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Internet.
3. Select a port for internet service. Make sure the cable is securely connected to this
port on your router.
4. Select your internet connection type from the drop-down list.
5. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with a cable TV or fiber cable.
Gaming Router
Dynamic IP, you need to select whether to clone the MAC address.
Set Up Internet Connection
> Archer GE800. Then follow the steps to
14