Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Diagonal Cutters
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Unscrew the screws on mounting angle 2, and then remove mounting angle 2.
2.
Unscrew the screws on cabling rack 3, and then remove cabling rack 3 from mounting angle 2.
3.
Unscrew the screws on front panel 4, and then remove front panel 4.
4.
Unscrew the screws on front panel 5, and then remove front panel 5.
5.
Unscrew the screws on front panel 6, and then remove front panel 6.
6.
Remove film 7.
7.
Remove film 8.
8.
Unscrew the screws on fan module frame 9, and then remove fan module frame 9.
9.
Unscrew the screws on rear cover plate 10, and then remove rear cover plate 10.
10. Unscrew the screws on reinforcing plate 12, and then remove reinforcing plate 12.
11. Unscrew the screws on reinforcing plate 11, and then remove reinforcing plate 11.
12. Unscrew the screws on PCB 13, and then remove PCB 13.
13. Unscrew the screws on busbar 14, and then remove busbar 14.
14. Remove all the labels.
15. Remove all shielding fingers.
16. Remove shielding gasket 4-2 from blank panel 4-1.
17. Remove film 4-3 from blank panel 4-1.
18. Remove shielding gasket 5-2 from blank panel 5-1.
19. Remove film 5-3 from blank panel 5-1.
20. Remove the nine fans 9-2 from fan frame 9-1.
21. Unscrew the screws on PCB 9-3, and then remove PCB 9-3.
22. Remove all of the inner cables.
23. Unscrew the screws on handle 9-4, and then remove handle 9-4.
24. Remove film 9-5 from fan frame 9-1.
25. Remove shielding finger 9-6 from fan frame 9-1.
26. Unscrew the screws on guide pin 13-2, and then remove guide pin 13-2.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Tool Size (if
applicable)
#2
Page 2
Advertisement
