Product Dimensions; Door Swing/Clearances Information; Reversing The Door - U-Line Echelon 2115WC Installation Manual

Product Dimensions

23-1/4"
Including
Handle
34-1/8"
14-15/16"
Black
23-1/4"
Including
Wood
Overlay
Figure 2
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see Figure 29 on Page 13).
06/2006
2115WC/2115WCOL Wine Captain
25-3/8"
Including
Handle
34-1/8"
14-15/16"
Stainless Steel
34-1/8"
14-15/16"
Wood Overlay
®

Door Swing/Clearances Information

Black and Wood Overlay units have a zero clearance for
the door to open 90° (see Figure 3). Stainless Steel
models require a minimum of 2-1/8" door clearance to
accommodate the handle if the unit is installed next to a
wall or similar type of structure.
Wall
1/4" Min.
16-1/2"
90°
Door Swing
Black, White and Wood Overlay
Figure 3

Reversing the Door

(Black Units Only)
All U-Line units
(except Stainless
Steel models) may be
left- or right-hand
opening. The door
opening is easily
reversed by moving
the hinge hardware
to the opposite side.
The top hinge
hardware will be
used on the bottom
of the other side and
the bottom hinge
hardware will be
used on the top of
the other side (see
Figure 4).
To reverse the door:
1. Remove top
hinge screw pin
from door (Phillips screwdriver) (see Figure 5).
Remove door by tilting forward and lifting off bottom
hinge pin.
5
2-1/8" Min.
21"
90°
Door Swing
Stainless Steel
Figure 4
ULIN_0015_A
www.U-LineService.com
Wall
21"
16-1/2"