Troubleshooting - U-Line Echelon 2075DWRRSS User Manual

Troubleshooting — What to check

TROUBLESHOOTING

Problem
No interior light.
The unit is not
cold enough.
The unit is not
cold enough
(continued)
Noise during
operation.
Drawer
temperature too
cold.
Drawer(s)
can't close.
Temperature
controller flashes.
when problems occur
Possible Cause
Loose or burned out
bulb.
Light staying on.
Item(s) interfering
with drawer.
Dirty condenser coils.
Airflow to front grille
blocked.
Temperature not set
cold enough.
Certain sounds
are normal.
Drawer not closed
correctly.
Temperature control
set too cold.
Items too tall.
Open Thermistor.
45
Remedy
Tighten or replace bulb.
See page 39 for light
replacement instructions.
Call for service.
Reposition or remove item(s).
Clean condenser.
See page 41.
Airflow must not be
obstructed to front grille.
See INSTALLATION.
Set temperature controller to
colder setting. See page 23.
Allow 24 hours for
temperature to stabilize.
Soft sounds from the
compressor and fan motor
will be heard.
Be sure drawer is closed
correctly.
Set temperature controller
to warmer setting.
See page 23.
Adjust items in drawer(s).
Call for service.