Table of Contents
Advertisement
1. Press the POWER switch to the ON position. Also
turn on the power to the stereo components you
wish to use.
2. Use the function buttons and tape monitor but-
ton as appropriate to select the desired program
source.
Select function according to the table on the right.
3. Operate the appropriate stereo component to
play back the program source.
TAPE RECORDING
tego
7
Function
TAPE 2
buttons
MONITOR
button
To listen to TAPE 1/VCR
TAPE 1
OFF
NCR
i
ft
To listen to a tape on the cas-
sette deck connected to the
aaa
ON
TAPE 2 MONITOR jacks.
223 O00)
COPYING TAPES
When two cassette decks are used, the sound played back on
the deck connected to the TAPE 1/VCR jacks can be recorded on
the deck connected to the TAPE 2 jacks.
TAPE 1/VCR
[When using two cassette decks]
2. Press the TAPE 1/VCR button.
10
<ARB7067>
Advertisement
Table of Contents
