Table of Contents
Advertisement
d= Remote sensor window
ad? CLASS button
Use to switch between preset memory classes 1 to 3. In each
class, one station can
be memorized in each of the 1 to 10 sta-
tions, enabling a total of 30 stations to be memorized.
42 FM/AM selector button
This button is used to select either AM or FM reception.
43 TUNING buttons {~,+)
+:
The FM or AM band is scanned in the direction of increasing
frequency.
-:
The opposite operation to that of the UP button takes place.
DISPLAY section
04 STATION buttons (-,+)
+:
Stations change in order in the upward direction.
-:
Stations change in order in the downward direction.
a8 BASS tone control
Use to adjust low-frequency tone. The center position is the flat
{normal} position. When turned to the right, low-frequency tones
are emphasized.
46 TREBLE tone control
Use to adjust high-frequency tone. The center position is the flat
{normal} position. When turned to the right, high-frequency tones
are emphasized.
@? BALANCE control
Should normally be feft in the center position. Adjust balance if
the sound is iouder from one of the speakers. If the right side is
louder, turn toward the L position and if the left side is louder,
turn toward the R position.
®
|
S.BASS
@ S.BASS indicator
Lights up when the SUPER BASS button pressed.
@® TAPE 2 monitor indicator
Lights up when the function buttons is set to TAPE
2 MONITOR
on,
@ CLASS 1 2 3 indicator
Indicates the class selected by the CLASS
buton. The current
CLASS is displayed.
6
<ARB7087>
®
®
(4)
¢
|
@)
(rape elictassy1 Tel
i
STEREO] TUNED
MONO
MEMORY
@ STEREO/MONO indicator
MONO : Lights up when the FM MONO mode is selected with
the MPX MODE button.
STEREO: Lights up when a stereo FM broadcast is being received.
©) TUNED indicator
Lights up when a station is tuned.
© MEMORY indicator
@ Character indicator
Advertisement
Table of Contents
