Maintenance; Protecting The Environment - Black & Decker BCL350 Instruction Manual

ENGLISH
Fig. B
2
Operating the Worklight (Fig. A)
• Press button 1 to turn side LEDs to moderate intensity
setting
• Press button a second time to turn side LEDs to high
1
intensity setting
• Press button 1 a third time to turn top LED on
• Press button a fourth time to turn worklight off
1
Use The Hanging Hook(s)
1. • This product can be used by hanging it from the
integrated hook(s). In that case, please pull up and use
the hanging hooks 5
• • After use, store the hanging hooks in their place along
the main body.
Note: Before suspending the product, make sure that
the surface from which it will be suspended can bear the
weight of the product.
The product may fall and be damaged.
Use the Magnets
* This product comes with two magnets
body.
* The worklight can be used by fixing it to an object made
of material such as iron. Before fixing the worklight with the
magnets, be sure that the hanging hooks are stored.
PREPARING FOR DISPOSAL
Removing the Battery (Fig. C)
At the end of the device lifetime, you should remove all
batteries before disposing of the item.

WARNING! RISK OF INJURY BY SPLINTERING!
Do not break device forcefully.
• Remove the screws on the housing and remove the
housing shell.
• Separate the connections on the batteries
remove.
• Dispose of the batteries in accordance with the
regulations.
16
3
stored along the main body.
4 along the main
and
5
Fig. C
5

MAINTENANCE

Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.

WARNING: To reduce the risk of serious personal
injury, turn off the tool and disconnect it from
the power source before making adjustments or
removing / installing devices or accessories. An
accidental start could cause injuries.

¡Important! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified organizations, always using identical
replacement parts. Unit contains no user service able
parts inside.
CLEANING

WARNING: Never use solvents or other abrasive
chemicals to clean non-metallic parts of the tool. These
chemicals can weaken the plastic materials used in these
parts. Use a cloth dampened only with water and neutral
soap. Never allow liquid to penetrate inside the tool or
immerse any of the parts in a liquid.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.