Table of Contents
Advertisement
Rotate the cap (4) counter clockwise (fig. B).
Carefully pull the fluorescent tube access cover out of
the opening.
Remove the two screws (9) from the clear plastic
housing. Rotate the cover upward to allow access to the
broken tube. Wearing protective gloves, remove the
broken glass or tube.
Move the clear plastic housing back to the closed
position and replace the screws (9).
Insert the new tube (3) in the same orientation as the old
tube making sure it is fully seated. Replace the
fluorescent tube access cover.
Replace the cap (4).
Bungee cord (fig. C)
Warning! When the area work light is hung by the bungee
cord (2), do not shake the work light or the object that it is
hanging from.
Do not hang the area work light from any electrical wires or
anything that is not secure. Personal injury or property
damage may occur.
Only use the bungee cord for hanging the area work light.
The bungee cord is not intended to support additional
weight.
Do not attach or hang anything additional to the work light or
risk of breakage may occur.
The built-in bungee cord (2) nests in the handle (1). The
bungee cord can be extended away from the handle and
used to hang the work light (fig. C). The bungee cord (2) can
also be removed from one end if required.
Rotating the light housing (fig. D & E)
The handle (1) can be moved by pressing down on the
handle release button (10) (fig. E) and rotating the
handle into one of six locked positions. The different
handle positions can be used to carry the area work light
or to lean the work light back on the handle for stationary
use.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance or cleaning
on the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do
not immerse the appliance in water.
6
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your appliance needs
replacement, or if it is of no further use to you, think of the
protection of the environment. Black & Decker repair agents
will accept old Black & Decker tools and ensure that they are
disposed of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Do not short-circuit the battery terminals.
Do not dispose of the battery in fire, as this may result in
an explosion.
Run the battery down completely, then remove it from
the appliance.
NiCd, NiMh, Lithium Ion and Lead Acid (Pb) batteries
are recyclable. They must not be disposed of with
household waste. Place the battery in suitable
packaging to ensure that the terminals cannot be short-
circuited. Take the battery to any authorised repair
agent or a local recycling station.
Advertisement
Table of Contents
