Installation - universalblue TIMANFAYA 4006 User Manual

Plug type
Length of the power supply
cable (cm)
Electrical current intensity
(A)
Tension (V)
Frecuency (Hz)
Energy class
Energy consumption per
cycle forced air convection
(2010/30/CE)
Energy consumption
per conventional cycle
(2010/30/CE)
Energegy class index
(2010/30/CE)
Power (W)
Instalation way
Built-in size (cm)
Sound alarm
Timer
Child lock
Temperature range
Nº cristales en la puerta

INSTALLATION

As indicated in the instructions, the
installation must be carried out by an
authorised installer. Our company is not
responsible for any environmental or
material damage resulting from incorrect
installation.
Notes for a correct installation (see picture
02 don page 04):
• Make sure the electrical installation is
adequate before calling the installer.
If it is not appropriate, please call an
electrician and make the necessary
modifications.
• For the oven to work properly, the
space in which it is embedded must
Schucko
100
9,5
220-240
50-60
A
0,74
0,77
A
2275
Under counter and In
tall unit
58,5 x 56x 55
Yes
Yes
No
50º - 250ºC
2
be properly dimensioned, made of
a suitable material, and resistant to
high temperatures. In particular, if the
sidewalls are made of wood, the cover
must be resistant to temperatures of up
to 100°C. Synthetic laminates, plastics
or adhesive materials that are not
resistant to high temperatures could be
damaged.
• Some types of finishes (e.g. vinyl)
are damaged and discolored at high
temperatures.
• Make sure that the power cable is not
bent or twisted and is not exposed
to the hot parts of the product. After
installation, the plug must be located in
an accessible place.
• The oven is designed to be installed in
places with standard measurements.
There must be a safe distance between
the product, the walls and the kitchen
furniture. Please install the product
according to the dimensions shown in
Figure 1 of this manual.
• For safety reasons, make sure that the
oven does not come into direct contact
with any electrical parts after its
installation.
• If the oven is installed under a built-
in hob, the distance between the two
electrical appliances must be of at least
50 mm.
• Ensure that
protective parts are installed in a way
that they can be removed without the
need for a tool.
• For more efficient air circulation,
remove the rear section of the cabinet
in the kitchen unit.
• It is not recommended to install the
product near a refrigerator or freezer.
Otherwise, the performance of such
appliances will be adversely affected
due to the emitted heat.
Installation and connection
The product can only be installed and
connected according to the installation
instructions.
Electrical connection
the insulating
EN
and
25