Jacobsen LF557 Safety, Operation & Maintenance Manual page 29

CONTROLS 6
6.2.4 PTO SWITCH _____________________________________________________________
The PTO switch is a 2-position switch to engage and to disengage the cutting units. The PTO switch
must be in the OFF position to start the engine.
Press the front part of the switch to move the switch to the ON position. When the PTO switch is in
the ON position, the light in the switch is on, the cutting units are engaged and the joystick is set to
automatic mode. When the cutting units are lowered, the reels will start to turn when forward travel
starts. When the cutting units are lifted or forward movement stops, the reels will stop.
Press the rear part of the switch to move the switch to the OFF position.
6.2.5 HORN SWITCH ____________________________________________________________
Press the front of the switch to use the horn.
6.2.6 LIGHT SWITCH ____________________________________________________________
The light switch controls the operation of the headlights. Press the front part of the switch to turn on
the headlights. Press the rear part of the switch to turn off the headlights.
en-26