Advertisement
(N-2)
OUTPUT1
INPUT
ANTENNA
: Signal flow
36
Type 1: Connecting to a TV without
Video/Audio Input Jacks
(N-2)
Connecting the camcorder, the RFU adaptor
(RFU-90UC, supplied), and the TV.
1 Connect the RFU adaptor to the
camcorder.
2 Connect the RFU adaptor to the VHF/UHF
antenna and to the TV.
3 Set the INPUT/OUTPUT selector on the
camcorder to OUTPUT.
Selection of the TV channel to monitor the
camcorder playback.
1. Set the RF unit selector on the RFU
adaptor to either 3CH or 4CH, whichever is
not active in your area.
2 Select the same channel on the TV.
Whenever playing back a tape, be sure to set
the TV to the channel that you have selected
in step 2.
Advertisement
