Dome Protocol Setup; Rs485 Setup - Speco DVR-4TN Manual
Triplex* digital video recorder family with network/ddns video server
Hide thumbs
Also See for DVR-4TN:
- User manual (148 pages) ,
- Quick start manual (2 pages) ,
- Owner's manual (139 pages)
Table of Contents
Advertisement
User's Manual
4.6.2
4.6.3
46
Dome Protocol Setup
The
Dome
Protoco|
menu
item lists the dome
protocols available
for
communicating
with
dome
cameras
connected
to
the
DVR-4TN/8TNA6TN/16TS/16TT
series unit. From
the Main
menu,
select
«Camera Setup? and press ENTER. The following menu is displayed.
Camera Setup
1. Camera Select
CH1
2. Dome Protocol
None
3. Dome ID
0
4. Camera Title
5. Covert
NO
6. Termination
NO
7. Brightness
0
8. Contrast
0
9. Saturation
0
10. Hue
0
11. Audio Association
Both
To configure dome protocol, first select a camera then set the communications
protocol associated with that dome camera using the Direction keys and press
ENTER. The available protocols include <Speco>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2> and <None> (default).
NOTE: The settings become effective after saving the changes and
exiting from the menu.
RS485 Setup
The DVR-4TN/8TNA6TN/16TS/6TT
series unit controls the domes
via
RS-485
communication
protocol.
The
RS-485
parameters
in
the
DVR-4TN/8TN/16FN/16TS/16TT
series
unit must
be set to the same
parameters as the protocol used in the RS-422 setup for the dome.
Users
are
allowed
to
change
the
RS-485
settings
of
the
DVR-4TN/8TN/A6TN/16TS/16TT series unit. Select «System Setup» in the
Main menu, then select <RS485 Setup? from the System Setup menu and
press ENTER. The following menu is displayed.
DVR-ATN/8TN/TGTN/GTS/167T Series
SPECO TECHNOLOGIES 05/07
Advertisement
Table of Contents
