Dome Protocol Setup; Rs485 Setup - Speco DVR-16TS Series Owner's Manual

4.6.2

Dome Protocol Setup

The Dome Protocol menu item lists the dome protocols available for
communicating
DVR-4TN/8TN/16TN/16TS/16TT series unit. From the Main menu, select
<Camera Setup> and press ENTER. The following menu is displayed.
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
11. Audio Association
To configure dome protocol, first select a camera then set the communications
protocol associated with that dome camera using the Direction keys and press
ENTER. The available protocols include <Speco>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2> and <None> (default).
4.6.3

RS485 Setup

The DVR-4TN/8TN/16TN/16TS/16TT series unit controls the domes via
RS-485
DVR-4TN/8TN/16TN/16TS/16TT series unit must be set to the same
parameters as the protocol used in the RS-422 setup for the dome.
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
with
Camera Setup
NOTE: The settings become effective after saving the changes and
exiting from the menu.
communication
dome cameras
protocol. The RS-485
User's Manual
connected to
CH1
None
0
NO
NO
0
0
0
0
Both
parameters in
the
the
45