Daylight Saving Time - Speco DVR-4TN Manual

User's Manual
Date Display Mode
This function allows user to set the OSD display type of the date / time. There
are three options to select from: «Y/M/D», «M/D/Y» or «D/M/Y». "Y"
represents "Year", "M" represents "Month" and "D" represents "Day".
Move to the desired item and press ENTER, the option starts blinking. Use UP
/ DOWN keys to change the setting. The default setting is <Y/M/D> in both
NTSC / PAL formats.
Time Display Mode
The user can choose to set the time format to «12 hour» or «24 hour». Use
the UP / DOWN keys to change the format. The default setting is «24 hour».
Date / Time Order
This item is used to set the order of the date / time display to «Date First» or
«Time First». Use UP / DOWN keys to change the setting.
3.5.2 Daylight Saving Time
Daylight Saving Time
This item is for those people who live in certain regions to observe Daylight
Saving Time. Select «ON» to enable, or «OFF» to disable the function.
If the function is disabled, the DST Start / End time and DST Bias will be
grayed out and cannot be accessed.
NOTE: If this function is enabled, the date/time information will be
shown on the screen with a DST icon when playing back recorded
video or searching video in the event list. "S" indicates summer time
and ^W" indicates wintertime.
DST Start / End
This is used to program the daylight saving duration. Use Direction keys to
move the cursor to the next or previous field, use UP / DOWN to change the
settings in the selected field.
DST Bias
This allows the user to set the amount of time to move forward from the
standard time for daylight saving time. The available options are «30», «60»,
«90» and «120» minutes.
DVR-4TN/BTNAGTN/ 16T8/16TT Series 27
SPECO TECHNOLOGIES 05/07