Rear Pane! Connections - Speco DVR-4TN Manual
Triplex* digital video recorder family with network/ddns video server
Hide thumbs
Also See for DVR-4TN:
- User manual (148 pages) ,
- Quick start manual (2 pages) ,
- Owner's manual (139 pages)
Table of Contents
Advertisement
User's Manual
Connecting Short-term Device
If you plan to install any short-term external devices, such as USB CD-RW,
USB Hard Disk Drive, etc, to the DVR-4TN/8TN/16TN/16TS/16TT series and
want to use them as part of the unit system. Make sure those devices are
connected only after the DVR-4TN/8TN/A6TN/A6TSA6TT is powered up.
The
DVR-ATN/8TNAGTN/16TS/16TT
series unit can
only recognize the
external devices after the power-up process is completed.
2.4
Rear Panel Connections
There
are
several
connectors
on
the
rear
panel
of
the
DVR-TN/8TNHAGTNAGTS/ASGTT series units available for installations. The
following figure shows the connectors by name and a detailed description of
each connector follows.
There
is one
difference
between
the rear panels of different models;
DVR-4TN/8TNA6TN has an IEEE 1394 connector and DVR-16TS/TT has a
1000M LAN Port instead, shown as below figures.
Rear Panel of DVR-4TN/8TN/16TN:
Main Monitor
Maln Monitor
Galt Monitor
{VGA)
(BNC)
{BNC}
Video In
Video Looping
Main Monitor
RS-232
AlermlO end
1EEE1394
Audio INOUL
USB2.0
LAN
Power Switch
Powor Supply
(S-Video)
RS-495
(2)
(2)
(x2)
DVRATN/BTNAGTN/ 16TS/16TT Series
45
SPECO TECHNOLOGIES 05/07
Advertisement
Table of Contents
