General; Intended User Group; Intended Use - Star FL3X Interface-PMC Instructions For Use Manual

1

General

1.1

Intended User Group

This product may only be used by expert technicians and/or engineers who are qualified and familiar with
electronic components and systems.
Each person involved with setup or operation of the product must
 be a qualified technician or engineer
 strictly adhere to this manual
 receive a briefing by an authorized person
If you are unsure of how to use the product as intended or have any questions about the
use of the product, please discontinue use of the product immediately and contact the
STAR ELECTRONICS GmbH & Co. KG Support.
The product may only be used by expert technicians and/or engineers who are qualified
and familiar with electronic components and systems!
The use of the product by non-professionals is not permitted and strictly forbidden!
1.2

Intended use

The FL3X Interface-PMC is a testing equipment. It was developed to test the communication behavior of
automotive bus systems and Ethernet together with Electronics Control Units and sensors in a fully
controlled testing and/or laboratory environment.
For this intended use, the FL3X Interface-PMC offers the following options:
-
Transmit and receive data (e.g., Use Case "Remaining Bus Simulation").
-
Exchange of data traffic between two or more bus systems (e.g., Use Case "Gateway")
-
Manipulation of data traffic (e.g., Use Case "Manipulation of signal values based on user
configuration")
-
Recording of data traffic (e.g., Use Case "Logging")
Any deviation from the intended use and/or installation in a testing vehicle is only permitted with specific
prior written approval of STAR ELECTRONICS GmbH & Co. KG.
The FL3X Interface-PMC may be used to communicate with networked electronic
systems. E.g., FlexRay, CAN or Ethernet.
Any use of the product outside a fully controlled testing and/or laboratory environment
may result in death or serious injury due to unpredictable behavior of a vehicle and/or
potentially missing, deactivated, or malfunctioning safety devices on a vehicle!
The user is responsible to ensure the safety of the entire system. This includes amongst
other things a safety shutdown.
Created by STAR ELECTRONICS GmbH & Co. KG
Date created 2023-02-08
NOTICE
WARNING
WARNING
Date modified 2023-02-08 Page 7 of 38