Table of Contents
Advertisement
Follow these steps to install the FL3X Interface-PMC in your PCI system:
1. Turn your host system off and unplug the power cable.
2. Ensure that you fulfill the EMC conformity and safety requirements. The technician should be
grounded.
3. Insertion and removal of the FL3X Interface-PMC should be done with care.
4. Insert the FL3X Interface-PMC into a free module slot of your PCI host / carrier module.
5. Fixate the FL3X Interface-PMC with the screws to the host / carrier module.
4.2.1 Customize the Bus Driver Terminating Resistor Values
For each bus channel, a bus termination can be switched on or off, so that different bus topologies are
supported for FlexRay and CAN-HS/FD bus. For FlexRay the FL3X Interface-PMC provides 90Ω split
termination, and for CAN-HS and CAN FD 120Ω split termination. The settings for the bus termination can
be done via software. Therefore, please read the FlexCard API Documentation how the termination can be
adapted to the specific needs.
4.3
Software Installation and Update
4.3.1 Preconditions
On all operating systems administrator access rights are required to install the device
driver.
The minimum system requirements for installing and running the FL3X Interface-PMC hardware and
software are:
Microsoft Windows 10 64 bit with/without Secure Boot
- Computer/Processor: 2 GHz or faster AMD/Pentium-compatible processor
- 2 GB of RAM
- Display: VGA or higher-resolution monitor
- Peripheral keyboard and mouse or compatible pointing device
- Free PMC-, PCI- or PCIe-slot
Linux (with/without Xenomai)
- Computer/Processor: 1 GHz or faster AMD/Pentium-compatible processor
- 256 MB of RAM
- Display: VGA or higher-resolution monitor
- Peripheral keyboard and mouse or compatible pointing device
- Free PMC- or PCI-slot
- FlexCard PMC-II: Tested with Linux kernel 5.15
- Optional supported Xenomai version: 2.5
The minimum system requirements for installing and running the FL3X Interface-PMC Ethernet hardware and
software are:
Created by
STAR ELECTRONICS GmbH & Co. KG
Date created
2023-02-08
Information
Date modified
2023-02-08
Page 25 of 38
Advertisement
Table of Contents
