Table of Contents
Advertisement
Problem
Short silences, echoes, or
speech cuts occur during
conversations.
While storing a phone number,
the unit starts to ring.
You cannot store a phone
number in memory.
The remote control does not
work.
The POWER indicator light
never goes out while the AC
adaptor is connected.
If you cannot solve your
problem.
Remedy
* Do not move the unit while it is in use.
* Keep your hands away from the unit
during calls.
* Keep files, cups, coffee pots, etc., away
from the unit.
* At the beginning of a call, both parties
should speak alternately. This enables the
unit to adapt to its environment and let
both parties speak simultaneously.
* The other party's phone might not be full
duplex. For best sound quality, the other
party should use a handset phone or full
duplex speakerphone.
* To answer the call, press
DIGITAL SP-PHONE). The program will be
canceled. Store the number again.
* You cannot store a number during a
conversation.
* Do not pause for over 30 seconds while
programming.
* Point the infrared transmitter towards the
remote sensor while storing.
* Move closer or in range of the unit (p. 10).
* Move the unit's remote sensor away from
strong light, such as direct sunlight.
* The battery power is low. Replace with a
new one (p. 7).
* Install the battery correctly (p. 7).
* Clean the remote sensor and the infrared
transmitter with a soft, dry cloth.
* This is normal.
* Call our customer satisfaction center at
1-800-922-0028.
HO
es S
Advertisement
Table of Contents
