Table of Contents
Advertisement
54
PROGRAMMING MODE - SETUP MODE
23. Beep volume
Entering set up mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
Press the Start button.
Press the Warm or the Cold button until
Press the Start button.
Display previous value.
Press Warm(+) or Cold(-) button to select
High or Low or Off.
Press the Start button.
The machine sets up the beep volume, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
Button
appears in the display.
appears in the display.
Display
Advertisement
Table of Contents
