Graco LineLazer GM 3500 Instructions-Parts List Manual page 6

FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
0
If there is any static sparking or you feel an electric shock while using this equipment,
stop spray-
ing immediately. Do not use the equipment until you identify and correct the problem.
0
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
0
Keep the spray area free of debris, including solvent, rags, and gasoline.
0
Disconnect all electrical equipment in the spray area.
0
Extinguish all open flames or pilot lights in the spray area.
Do not smoke in the spray area.
0
Do not turn on or off any light switch in the spray area while operating or
if
fumes are present.
0
Do not operate a gasoline engine in the spray area.
Ground the sprayer to a true earth ground with the ground wire and clamp (supplied).
0
Use only electrically conductive hoses.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
Keep clear of all moving parts when starting or operating the sprayer.
0
Before servicing the equipment, follow the Pressure Relief Procedure on page 7 to prevent the
equipment from starting unexpectedly.
6
308-082