Dantherm Flexibox 810 indoor Service Manual page 7

Product description,
Cooling air flow The illustration and table below describes the free cooling airflow of a Flexibox 810 in-
door setup
3
Cooling
Phase
1
2
3
continued
2
Cold outside air is drawn into the Flexibox through the air filter, and sup-
plied into the warmer shelter
Cold air will mix with the warmer air, and push the warmest air towards the
ceiling
The open damper placed near the ceiling, releases the warm air to the out-
side surroundings
Fig. 3
Description
1
5