4. NTSC/PAL:
NTSC
Adjust so that the yellow (or white) in the
diagonally striped portion is the maximum.
6. B-drive adjustment
Conditions for adjustment
1. VA ADJUST MODE
2. INPUT SELECT:
RGB
3. AGC:
OFF
4. NTSC/PAL:
NTSC
Spec.
-
Adjustment
[SERVICE MENU3]
[B-DRIVE:]
Monitor
Adjust so that the white in the diagonally
striped portion is the maximum.
7. AGC REF adjustment
1. VA ADJUST MODE
Monitor
2. INPUT SELECT:
RGB
| 3. AGC:
ON
| 4. NTSC/PAL:
NTSC
{SERVICE MENU3}]
[SUB-BRIGHT:]
Adjust so that the white in the diagonally
striped portion is the maximum.