Sony UP-21MD Service Manual page 15

9. Remove the two screws (B 4 X 20) and then remove
the DC fan.
10. Disconnect the two harnesses from the connectors
(CN201 and CN207) on the MEC-15 board.
11. Disconnect one harness connected to the thermal head
from the switching regulator.
12. Remove the four screws (BVTT 3 X 6) and then
remove the mechanical deck assembly in the direction
indicated by the arrow.
MEC-15 board
Connector
Connector (CN201)
(CN207) Harnesses
Switching
regulator
UP-21MD Vi
13. Disconnect the five harnesses from the connectors
(CN105, CN203, CN204, CN205, and CN206) and the
four flexible flat cables from the connectors (CN102,
CN103, CN104, and CN106).
14. Remove the three screws and then remove the MEC-
15 board.
Flexible flat cable Harnesses
exe
Connector at
cables
OO assess parted al
(CN205 KONE)
Mechanica! \ Connector
deck (CN102)
assembly
Connector ~.
'CN203)
Connector
(CN104)
(CN106) N105)
Connector
(CN103) MEC-15 board
15. Attach mechanical deck assembly in the reverse order
of steps 1 to 14.
1-5