Samsung WF231 Series User Manual page 31

OE
E2
SL
A fault is detected in the water Call for service
level senson
Jammed Key. Call for service
Motor speed sensor problem.
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Too marly suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
troubbshooting and information codes 31
"_T231ANW-02832D EN.indd Sec10:31 2011-04-18 10:38:32 I