Activating Tone Function; Selecting A Tone Frequency - Kenwood TH-235A Instruction Manual

@ Activating Tone Function
m@ Selecting a Tone Frequency
1 Press [F], [A].
Se ee
2 Tart the Tuning tei to selec! the appropriate
receive/ transmit tone frequency.
* The frequencies listed in the table below are
selectable.
To select a separate receive and transmit tone
frequency for the CTCSS function {page 25}, install the
optional TSU-8 unit {page 43}, then proceed to the
subsequent steps.
4 Press [F], [6].
5 Turn the Tuning control to select the appropriate
receive tone frequency.
e
The frequencies listed in the following table are
@ |
selectable.
e The tone frequency that you selected in step 2 is used
for transmitting.
6 Press any key other than [MONIT] and [D] to
Comper the setting.
14750 Hz: European versions only