Samsung AC026FBRDEH Service Manual page 30

The procedure of setting option
12. Setting Cool mode
Press Mode button to be change to Cool mode in the OFF status.
13. Setting SEG16, SEG17 option
Press Low Fan button( ) to enter SEG16 value.
∨
Press High Fan button(
∧
Each time you press the button,  
14. Setting Dry mode
Press Mode button to be change to Dry mode in the OFF status.
15. Setting SEG18, SEG20 option
Press Low Fan button( ) to enter SEG18 value.
∨
Press High Fan button(
∧
Each time you press the button,  
16. Setting Fan mode
Press Mode button to be change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button( ) to enter SEG21 value.
∨
Press High Fan button(
∧
Each time you press the button,  
18. Setting Heat mode
Press Mode button to be change to HEAT mode in the OFF status.
19. Setting SEG23, SEG24 mode
Press Low Fan button( ) to enter SEG23 value.
∨
Press High Fan button(
∧
Each time you press the button,  
Step 3. Check the option you have set
After setting option, press
Option
Remote Controller Display
Option
Remote Controller Display
Step 4. Input option
Press operation button
For the correct option setting, you must input the option twice.
Step 5. Check operation
1. Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
2. Take the batteries out of the remote controller and insert them again and then press the operation button.
Samsung Electronics
(cont.)
Option setting
) to enter SEG17 value.
 will be selected in rotation.
...
) to enter SEG20 value.
 will be selected in rotation.
...
) to enter SEG22 value.
 will be selected in rotation.
...
) to enter SEG24 value.
 will be selected in rotation.
...
button to check whether the option code you input is correct or not.
[SEG2,3] [SEG4,5]
[SEG14,15] [SEG16,17]
with the direction of remote control for set.
[SEG6,8] [SEG9,10]
[SEG18,20] [SEG21,22]
Status
SEG16 SEG17
SEG18 SEG20
SEG21 SEG22
SEG23 SEG24
[SEG11,12]
[SEG23,24]
4-3