Table of Contents
Advertisement
1-4. Using the Panel Button
The panel button on the operation panel is used to operate the Ethernet function. You can
use it to print settings information and restore factory default settings.
1-4-1. Printing the Network Configuration
Press the panel button to print out the network configuration.
■ Configuration items that are printed
① Title of the printout.
② Firmware version of printer..
③ Network settings such as the IP address
currently being used. When the network is
not connected, the IP address is "0.0.0.0".
*** With DHCP setting ON, DHCP status is
printed as follows.
ON (Acquiring) - Still trying to get IP address
ON (Success) - Getting IP address succeeded
ON (Fail) - Getting IP address failed.
If panel button is pressed within 60 seconds
after power on with DHCP enabled settings, IP
address may not be obtained yet. In such
case, IP address is shown as 0.0.0.0.
CITIZEN Label Printer Library for Windows - Programming Manual
①
②
③
7
Panel Button
Network
Information
Firm Ver.
: ES00-000X
Current Status
MAC
: 00:01:02:0a:0b:0c
Host Name : no name
DHCP
: ON (Success)
IP Addr.
: 192.168.11.4
Subnet
: 255.255.255.0
Gateway
: 192.168.11.1
Timeout
: 60
PrintPort : 9100
Advertisement
Table of Contents
