Download Print this page

Standard Features - True TCGG-48 Specifications

Display case: curved glass deli case
Hide thumbs Also See for TCGG-48:

Advertisement

Model:
TCGG-48

STANDARD FEATURES

DESIGN
• True's curved glass deli display case
combines effi cient, high volume
merchandising and exceptional
refrigeration with an elegant curved
glass front for sophisticated presentation
of deli products.
• Exceptional gravity coil refrigeration
system guarantees the freshest display of
meats and cheeses designed to increase
sales and profi ts.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor and
large condenser maintains 38°F to 40°F
(3.3°C to 4.4°C).
• Gravity coil refrigeration system. Ideally
suited for deli meats, cheeses and salads.
• Condensing unit located behind panel in
back of unit. Entire system slides out for
easy cleaning and maintenance.
• Automatic defrost system; time-initiated,
time terminated.
CABINET CONSTRUCTION
• Exterior - durable and permanent
no peel or chip white laminated vinyl
with stainless steel top and trim.
• Interior - NSF approved white aluminum
sides and top. 300 series stainless steel
fl oor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
PLAN VIEW
5
46
/
"
8
(1185 mm)
3
/
"
4
(20 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Display Case:
Curved Glass Deli Case
• Welded, heavy duty galvanized frame
rail dipped in rust inhibiting enamel
paint for corrosion protection inside and
out.
• Frame rail fi tted with leg levelers.
CURVED FRONT DISPLAY GLASS
• Insulated double pane glass provides
maximum insulation value for greater
effi ciency and energy savings. Both
panes are tempered for safety.
DOORS
• "Low-E", double pane thermal glass
insert with mitered plastic channel
frame.
• Each door fi tted with 12" (305 mm) long
molded plastic handle.
• Self-closing doors with smooth, even,
positive closure. Sliding doors ride on
stainless steel V-Channel with stainless
steel bearings. Doors fi t within plastic
channel frame.
SHELVING
• Two (2) adjustable, lighted white heavy
duty PVC coated wire shelves 43
3
14
/
16
system is cantilevered and angle can be
adjusted to maximize presentation.
LIGHTING
• Case is equipped with 3 light sources
for maximum product display; (2) shelf
mounted and (1) cabinet mounted.
Fluorescent lamps are low UV emitting
to enhance product appearance and
increase shelf life.
5
48
/
"
32
(1224 mm)
7
22
/
"
16
(570 mm)
5
/
"
16
(8 mm)
BACK VIEW
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
3
"D (1112 mm x 361 mm). Shelving
1
29
/
"
4
(743 mm)
11
47
/
"
16
(1212 mm)
13
15
/
"
32
(392 mm)
Model
KCL
TCGG-48
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• Four (4) amp exterior scale receptacle.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
115/60/1
NEMA-5-15R
RECOMMENDED OPERATION CONDITIONS
• TCGG models are designed to operate in
an environment where temperature and
humidity do not exceed 75°F (23.8°C)
and 55% relative humidity.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/fl anged legs.
/
"L x
4
❒ 2
1
/
" (64 mm) diameter castors.
2
❒ Ratchet locks.
❒ Additional lighted shelves.
❒ Non-lighted shelves.
❒ Lighted stainless steel mezzanine
shelves.
❒ Non-lighted stainless steel mezzanine
shelves.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve and
requires R404A refrigerant). Consult
factory technical service department for
BTU information.
35
31
/
"
32
(914 mm)
5
35
/
"
32
(893 mm)
19
16
(422 mm)
7
34
/
"
8
(886 mm)
1
29
/
"
16
(739 mm)
RIGHT VIEW
Elevation
Right
13
/
"
/
"
32
16
(21 mm)
Plan
3D
Back

Advertisement

loading