Standard Features - True TRCB-82-84 Specification Sheet

Model:
TRCB-82-84

STANDARD FEATURES

DESIGN
• True's commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today's food
service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Oversized, factory balanced refrigeration
system with guided airfl ow to provide uniform
product temperatures.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures of
33°F to 38°F (.5°C to 3.3°C) for the best in food
preservation.
• Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
chef base units a more effi cient low velocity,
high volume airfl ow design. This unique
design ensures faster temperature recovery
and shorter run times in the busiest of
foodservice environments.
• Condensing unit accessed from behind side
grill; slides out for easy maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and sides.
Matching aluminum fi nished back.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless fl oor with
coved corners.
• Insulation - entire cabinet structure and
drawer facings are foamed-in-place using high
density, CFC free, polyurethane insulation.
• 4" (102 mm) diameter plate castors standard
- locks provided on front set.
PLAN VIEW
20 3 / "
8
(518 mm)
3
25 / "
8
(645 mm)
5" 4"
(127 mm) (102 mm)
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
2001 East Terra Lane • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Chef Base:
Drawered Refrigerator
• Cabinet top is one piece, heavy duty reinforced
300 series stainless steel. Drip resistant "V"
edge protects against spills. Supports up to
1084 lbs. (492 kg).
DRAWERS
• Stainless steel exterior drawer facings and
liners. Stainless steel drawer frames.
• Each drawer fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Heavy-duty stainless steel drawer slides and
rollers. Removable without tools for easy
cleaning.
• Magnetic drawer gaskets of one piece
construction, removable without tools for ease
of cleaning.
PAN CAPACITY
• Each left drawer accommodates three (3)
full size 12"L x 20"W x 4"D (305 mm x 508
mm x 102 mm) food pans. Each right drawer
accommodates two (2) full size food pans (sold
separately).
• Drawers will support a wide variety of
incremental pan size confi gurations. Each
left drawer standard with two (2) full length
removable divider bars. Each right drawer
standard with one (1) full length removable.
divider bar.
Marine Edge (30° angle)
82"
(2083 mm)
PLAN VIEW
84"
(2134 mm)
ELEVATION
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
PAN LAYOUT
1
30 / "
16
(764 mm)
(616 mm)
°F
1 1 / "
32
(27 mm)
20" 1"
(508 mm) (26 mm)
Model
KCL
TRCB-82-84
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• Exterior digital temperature display.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
115/60/1
NEMA-5-15R
RECOMMENDED OPERATION CONDITIONS
• Counter-top cooking equipment should be
used in conjunction with the manufacturer
supplied legs. Minimum clearance of 4"
(102 mm) required between bottom of
cooking equipment heating element and the
TRCB top. Failure to provide clearance voids
manufacturer warranty.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230-240v /50 Hz.
❒ 6" (153 mm) standard legs (1 set of 6 leg
mounting plates required).
❒ 6" (153 mm) seismic/fl anged legs (1 set of 6 leg
mounting plates required).
❒ Heavy duty 16 gauge top.
❒ Flat top (no marine edge)
❒ Additional size drawer divider bars.
❒ Remote cabinets (condensing unit supplied
by others), consult factory technical service
department for BTU information.
57 5 / "
16
(1456 mm)
1 1
24 / " 32 / "
4 16
(815 mm)
RIGHT VIEW
Elevation Right
TFQY76E TFQY75S
1"
(26 mm)
5
2 / "
16
(59 mm)
11
2 / "
16
(69 mm)
Plan 3D
TFQY76P TFQY763