Weekly Event Timer; Additional Settings For Weekly Timer; Other Functions; Switching The Key Sound On/Off - Bosch Climate 5000i M Series Operating Instructions For Users

Operation
3.8.3

Weekly event timer

Setting timer
Up to 8 events can be set for each day to change the operating mode,
temperature and fan speed.
▶ Keep pressing the TIMER key until WEEK 2 appears in the display.
▶ Confirm with  key.
▶ Press the . or / key to select the weekday.
▶ Confirm with  key.
▶ Press the . or / key to select the setting time, main operating
mode, temperature or fan speed for the event.
▶ Confirm with  key.
▶ Make the setting and press the  key to confirm or the DAY OFF key
to delete the setting.
▶ Repeat the procedure to define additional setting periods for this day.
▶ Follow the same procedure to program additional weekdays.
To delete the timer for the selected day:
▶ Press the DAY OFF key.
Defining the setting time
▶ Press the . or / key to adjust the time.
▶ Confirm with  key.
Selecting the main operating mode
▶ Press the . or / key to select the main operating mode
( Table 7, [1], page 52) ).
▶ Confirm with  key.
The fan speed cannot be adjusted in automatic and dehumidification mode.
Setting the room temperature
▶ Press th . or / key to set the desired room temperature.
▶ Confirm with  key.
Fan step
▶ Press the . or / key to adjust the fan step.
▶ Confirm with  key.
The temperature cannot be adjusted in Fan Mode.
Activating the timer
▶ Press the TIMER key until WEEK 2 appears in the display.
The timer is now switched on. The unit will adjust itself automatically
on these selected times and days.
Deactivating the timer
▶ Press the Kor TIMER key for several seconds.
3.8.4

Additional settings for weekly timer

Provisionally disabling the timer
To disable the timer on selected days only:
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
▶ Press the  key.
▶ Press the . or / key to select the weekday.
▶ Press the DAY OFF key.
The selected day is no longer displayed.
The timer is deactivated for the days that are not displayed until the day
has passed.
54
▶ Press the DAY OFF key again to display the day once again.
▶ Repeat the above if necessary for the other days.
Adopting (copying) settings from one day to another day
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
▶ Press the  key.
▶ Press the . or / key to select the day whose settings should be
adopted.
▶ Press the COPY key to copy the settings.
CY appears on the display.
▶ Press the . or / key to select the day to which the settings should
be copied.
▶ Press the COPY key to insert the copied settings.
The selected weekday flashes briefly as confirmation.
▶ Repeat the above steps if necessary to copy the information to
other days.
▶ Press the  key to adopt the changes.
3.9

Other functions

3.9.1

Switching the key sound on/off

To switch the key sound of the wired room controller on or off:
▶ Press and hold the and FUNC. keys for three seconds.
3.9.2

Turbo cool/Turbo heat

When Turbo cool/Turbo heat is active, the indoor unit operates at
maximum power to heat or cool the room quickly.
Turbo Cool:
▶ Switch on cooling mode.
▶ Press the FUNC. key.
▶ Confirm with  key.
Turbo Heat:
▶ Switch on heating mode.
▶ Press the FUNC. key.
▶ Confirm with  key.
Exiting the function:
▶ Press the FUNC. key again.
▶ Confirm with  key.
3.9.3

Wireless control function

The purpose of this function is to establish a connection via WLAN.
To connect to WLAN an IP-Gateway (optional accessory)
must be installed.
3.9.4

Keylock

The keys of the wired room controller can be locked with the keylock.
To switch the keylock on or off:
▶ Press/keep the TIMER and COPY keys pressed simultaneously for
three seconds.
The symbol appears in the display when the keylock is active.
3.9.5

Follow me function (Follow Me)

This function activates the temperature sensor of the wired room
controller. The room temperature is measured at the position of the
wired room controller instead of at the indoor unit.
▶ Switch off heating or cooling mode if required.
▶ Press the FUNC. key to switch the function on or off.
When the function is active the wired room unit displays the
symbol.
▶ Confirm with  key.
Climate 5000i M – 6721849823 (2022/11)