Explanation Of Terms - Panasonic NV-DS28A Operating Instructions Manual

1: Recording does not start although power Is
supplied to the Movie Camera and the Cassette Is
correctly inserted.
1-1: Is the accidental erasure prevention slider on the
Cassette open? If it is open (set to [SAVE]), recording
cannot be performed. (+ 11)
1-5: Has condensation occurred? Wait until the
Condensation Indication disappears. (-» 43)
Other Recording
1: Auto Focus Function does not work.
1-2: There are some recording subjects and recording
surroundings for which the Auto Focus Function does
not operate correctiy. In this case, use the Manual
Focus Mode to adjust the focus. (+ 47)
Editing
1: Audio dubbing cannot be performed.
Indications
1: The Time Code becomes inaccurate.
3-1: If scenes of less than 15 seconds are continuously
recorded, the remaining tape time cannot be displayed
correctly,
Playback (Images)
1: Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the
playback function cannot be used. (= 26)
2: Mosaic-pattern noise appears on images during
'Cue, Review or Slow Motion Playback.
2: This phenomenon is characteristic of digital video
systems. It is not a malfunction.
3; Have you selected "Video Input" on the TV? Please
read the operating instructions of your TV and select the
channel that matches the input sockets used for the
connection.
4: Playback image is not clear.
4: Are the heads of the Movie Camera dirty? If the heads
are dirty, playback image cannot be clear. (-» 44)
Playback (Sound)
4: Sound is not played back from the built-in speaker
of the Movie Camera or the headphones.
1: Is the volume too low? During playback, keep pressing
the [PUSH] Dia! until the [VOLUME] Indication appears.
Then, turn the [PUSH] Dial to adjust the volume. (=) 26)
2: Different sounds are reproduced at the same time.
2: [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-
Menu of the [VCR FUNCTIONS] Main-Menu has been
set to [MIX]. As a result, the original sound and sound
that was recorded by audio dubbing are played back
together. It is possible to reproduce the sounds
separately. (> 30)
3: The original sound was erased when audio dubbing
was performed.
3: If you perform audio dubbing on a recording done in
[16bit] Mode, the original sound will be erased. If you
wish to preserve the original sound, be sure to select
[12bit] Mode at the time of recording.
4: Sounds cannot be played back.
4-1: Although a Cassette with no audio dubbing is being
played, is [12bit AUDIO} on the [PLAYBACK
FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS}
Main-Menu set to [ST2]? To play back a Cassette with
no audio dubbing, [12bit AUDIO} must be set to (ST 1].
(> 30)
4-2: Is the Variable Speed Search Function working? Press
the [>] Button to cancel the Variable Speed Search
Function. (=> 26)
Card (NV-DS38 only)
1: Recorded images are not beautiful.
(> 32, 34, 42) pr
Explanation of Terms
The si
Comp
Becau
analog
Camel
for pla
WiFo
Auto
The At
backw
the sul
Howey
for the
conditi
Please
2) Re
3) Re
4) Re
5) Re
6) Re
os
u
c
ww
Depen:
by the
images
minimi;
Called *
White
White f
makes
white,
Auton
This M:
saveral
determ
and WI
Tecordi
functior
Howev:
of light
does nv
that is:
Wtin
Time C
hours, '