Table of Contents
Advertisement
APP SHORTCUT FEATURE
The Smart Control features 3 App Shortcut keys for viewing digital TV, streamed over the
internet. If your original remote control already had a key for this - for example many newer
TVs have a Netfl ix key - then this key will perform exactly the same as the key on your
original remote. However if you did not have a key like this, but still had the ability to watch
a streaming service, you can use this key as a shortcut by programming a macro on it. Most
AV devices which are connected to the internet, such as Smart TVs or streaming Set Top
Boxes have one or more applications they can run to access TV viewing via the internet.
Examples of these would be Netfl ix, YouTube, Amazon Prime, BBC iPlayer or similar.
To program the macro, you fi rst need to know the device you use to access the service, and
then the sequence of keys you need to press to always bring up the service you prefer, For
example, some Panasonic TVs will start Netfl ix by pressing the Apps key, then Menu Down
Twice, and fi nally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down and OK.
Once you have determined the sequence for your device, follow these steps:
1.
Sit in front of your device with It switched on (not on standby)
2.
Hold down the App Shortcut key until the LED blinks twice and stays lit
3.
Use the DEVICES key to select the device you want to use for the
App Shortcut macro (e.g. TV)
4.
Now perform the sequence of keys exactly as would normally.
The remote will operate your device and the macro is recorded in
real time - so if it normally takes a few seconds for your device to
react don't worry.
5.
One you have fi nished the sequence - and the Streaming Service
has started on your device - hold down the App Shortcut key until
the LED blinks twice and goes out. The macro is now stored.
Tips
•
Make sure the Smart Control Is operating the device in question before programming
•
If you fi nd the Macro doesn't work as expected, you can just repeat the same
sequence to reprogram
•
When programming, wait for your device to respond fi rst, the remote will remember
the timing
•
The App Shortcut macro is tied to one device, remember to make sure you are
watching the correct device.
711753
RDN 1250618
Customer Support: 855-716-2573 (toll free)
OFA warranty/terms & conditions: 855-569-6595 (toll free)
www.oneforall.com
Imported into the US by:
Universal Electronics Inc.
UEI Technical Support Services,
Suite 301
26250 Euclid Ave.
Euclid, OH 44132
One For All is a registered trademark of UEI
Made in China, Hecho en China
Advertisement
Table of Contents
