Download Print this page

One For All URC-7800 Cinema 7+ User Manual

One for all urc-7800: user guide.
Hide thumbs


URC 7800
Cinema 7+
User Guide
Previous Model Name: Cinema 7
Web Site :


   Also See for One for All URC-7800 Cinema 7+

   Summary of Contents for One for All URC-7800 Cinema 7+

  • Page 1: User Guide

    URC 7800 Cinema 7+ User Guide Previous Model Name: Cinema 7 Web Site :

  • Page 2: Table Of Contents

    ONE FOR ALL® PRODUCTS Limited Warranty...32 Web Site : OVERVIEW Thank you for purchasing the One For All universal remote control with learning. Along with being a complete Home Theater universal remote, the Cinema 7+™’s sophisticated technology will allow you to finally con- solidate the clutter of all of the original remotes in your home entertainment system.

  • Page 3: Features And Functions

    The illustration below and the chart on the next three pages describe the features and functions of the Cinema 7+™ uni- versal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs.

  • Page 4

    OSD (On Screen Display) key on your original remote. Use and Right) to navigate your menus. If your original remote control had a SELECT key to select options in your menus, use SEL. Use the EXIT key to exit/clear your On-Screen menus. Please consult your home entertainment component’s original...

  • Page 5: Installing The Batteries

    Test the unit by pressing POWER. If the batter- ies are inserted correctly, the red light will blink. NOTE: Removing the batteries will not require you to repro- gram your remote control because the Cinema 7+™ has unlimited memory backup. SETTING UP YOUR COMPONENTS Programming the Cinema 7+™...

  • Page 6: Programming The Cinema 7 To Operate Your Vcr

    Aim the Cinema 7+™ at your VCR and press POWER. Your VCR should turn off. If your original VCR remote control did not have a POWER key, press STOP. Your VCR should stop. If your VCR does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your VCR.

  • Page 7: Programming The Cinema 7 To Operate Your Tv/vcr Combo

    Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0209, 0479, 0002, 0121 Calix 0037 Setup Codes For VCRs (continued) Canon 0035 Carver 0081 0072, 0278 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0072, 0240, 0037, 0047, 0271 Curtis Mathes 0035, 0041, 0060, 0202 Cybernex...

  • Page 8: Setup Codes For Tv/vcr Combos

    press POWER. The unit should turn off. If it does not respond, Repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV/VCR Combo. NOTE: If you have tried all the codes listed for your brand and your TV/VCR Combo does not respond, try using the search method found on page 22.

  • Page 9: Programming The Cinema 7+™ To Operate

    Denon 0059 Mitsubishi 0059 0059 Pioneer 0059 Sony 0193, 0201 Programming the Cinema 7+™ to operate your Receiver/Tuner: Locate the brand name of your Receiver/Tuner in the “Setup Codes For Receiver/Tuners” section (starting below), and write it in below. Receiver/Tuner Brand: ______________________ The brands are listed in alphabetical order with the most popular codes listed first.

  • Page 10: Setup Codes For Cd Players

    boxes to the left for future reference. Remember, if you want to use your Cinema 7+™ to operate your CD Player, press the CD key first. Setup Codes For CD Players Aiwa 0124, 0157 Bang & Olfusen 0212 Burmester 0420 California Audio 0029 Carver...

  • Page 11: Setup Codes For Satellites

    Hytex 0007 Jasco 0153, 0315, 0015 Jerrold 0476, 0003, 0014, 0011, 0012, 0015, 0810 Linsay 0440 Magnavox 0027, 0014 Memorex 0000 Movie Time 0063, 0156 Novaplex 0618 Setup Codes for Cable Converters (continued) 0063, 0156 0007, 0019 Optimus 0021 Panasonic 0021, 0107, 0000 Panther 0637...

  • Page 12: Searching For Your Code

    Down for a VCR. With the learning feature on the Cinema 7+™, you can add these functions and many others learned from your original remote control. NOTE: Please have your original remote controls handy before performing learning on the Cinema 7+™.

  • Page 13: Deleting Functions From The L Keys

    Press and release the L key in which the new fea- ture is to be learned. The Cinema 7+™’s red light will flash rapidly. Align your original remote control with the arrow mark to the left of the LED on your Cinema 7+™ remote control (see diagram below) 2"...

  • Page 14: Re-assigning Device Keys

    Aiwa 0010, 0159, 0404 Fisher 0052 Harman/Kardon 0477 Jerrold 0459, 0520 0073 Nikko 0376 0056 Scientific Atlanta 0460 Sony 0010, 0159 Starcom 0459 RE-ASSIGNING DEVICE KEYS You can use the Cinema 7+™ to operate a second TV or a second VCR or any combination of seven home entertain- ment components.

  • Page 15: Volume Lock

    Sleep Timer, please consult your original owner’s manual. Even if your original Cable Converter remote control did not have a sleep timer, your Cinema 7+™ has its own built-in sleep timer. If your Cable Converter does not have a sleep timer, press the SLEEP key to activate the Cinema 7+™’s...

  • Page 16: Trouble Shooting

    Mini-system, book- These systems may operate using a CD or Misc. shelf, or boombox Audio code. If the original remote control did not not working? have a power key, press PL (or STOP) to turn on (or off) the system.

  • Page 17: One For All® Products Limited Warranty

    ONE FOR ALL PRODUCTS Limited Warranty One For All (“OFA”) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase.

This manual also for:

One for all 7800man

Comments to this Manuals

Symbols: 0
Latest comments: