Making A Recording; The Reset Function; Product Service - Panasonic SA-HE200 Operating Instructions Manual

Making a recording The RESET function
Recording on other equipment
You can record to a tape deck connected to TAPE REC (OUT), a
CD-recorder connected to CD-R/RW REC (OUT), a VCR connected
to VCR 1 OUT, a DVD recorder/VCR connected to DVR/VCR 2
OUT, or digital recording equipment connected to DIGITAL
OPTICAL OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
® Turn [INPUT SELECTOR] to select the source to
be recorded.
(2) Begin recording.
Follow your recording unit's operating instructions.
(D Start the source to be recorded.
Follow your equipment's operating instructions.
Note
• With a tape deck, you can record any analog source except
TAPE.
• With a CD recorder, you can record any analog source except
TAPE and CD-R/RW.
• With a VCR (connected VCR 1), you can record any analog
source except TAPE and VCR 1.
• With a DVD recorder/VCR (connected DVR/VCR2), you can
record any analog source except TAPE and DVR/VCR2.
• With digital recording equipment, you can record any digital
source without copy protection.
• When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
• Some sources do not allow digital recording. Connect through the
analog terminals and select "ANALOG" input.
While the unit is on
While pressing and holding [DSP SOUND
MODE], press [POWER, 6/1], so "RESET"
appears on the display.
Settings are reset to those made at the time of shipment. Preset
radio stations remain intact.
Product Service
1. Damage requiring service
— The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing
— Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
3. Replacement parts
— When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock, or
other hazards.
4. Safety check
— After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper
working condition.
Product information
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at 1-
800-211-7262, or e-mail consumerproducts@panasonic.com, or
web site (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care
Centre at 905-624-5505, web site (www.panasonic.ca), or an
authorized Servicentre close to you.
21
RQT6250