Panasonic SA-HE200 Operating Instructions Manual page 12

p D
Main unit
,T v , *
Control guide
[ENHANCED SURROUND] !
For turning on the enhanced surround mode. The indicator lights
when the mode is on.
j
[HQ SOUND MODE] ' j
For selecting the HQ sound mode. The indicator lights when the [
mode is on. '
[RE-MASTER]
For selecting a re-master mode. The indicator lights while a re-j
master mode is on. I
[[SOURCE DIRECT]
j For selecting a source direct mode.
[Remote control sensor
[POWER,
6/1]
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
[DSP SOUND MODE]
j
For selecting "STEREO", "SURROUND" or "SFC" j
[DOLBY PRO LOGIC H]
For selecting a Dolby Pro Logic fl mode: MOVIE, MUSIC or
j
PANORAMA.
Use when "DOLBY PRO LOGIC
D"
lights in the SURROUND mode.
[PHONES]' " ' ' ~ ]
Headphone jack J
Plug type: 6.3 mm (1/4") stereo
j
Avoid listening for prolonged periods of time to prevent hearing)
damage. !
Turn the speakers off when using the headphones. 1
[SPEAKERS, A, B]
! For selecting speakers A or B.
1 Turning the speakers off automatically engages the STEREO;
I mode {when listening through headphones, for example). j
| If your speakers have an impedance under 6
Q j
i Press and hold [A] or [B] until "LOW IMP" lights up on the display. <
Note that when "LOW IMP" is on, SPEAKERS A and B cannot be;
used at the same time.
J
|[NEO:6]
i For selecting a DTS NEO:6 mode: CINEMA or MUSIC. j
| Use when "NEO:6" lights in the ENHANCED SURROUND mode.
[INPUT MODE]
For selecting AUTO, ANALOG or DIGITAL. _
[DVD 6CH INPUT] ' ~ ' 1
For switching between 6-channel and 2-channel DVD input. |
When you select DVD 6CH, SOURCE DIRECT is on. j
RQT62S0