Care And Cleaning - AEG Pure 3000 Manual

CARE AND CLEANING

NOTE: Always unplug the air purifier before
cleaning to prevent shock or fire hazards. Never
use abrasive, harsh detergents OR wax for
cleaning the unit. The high efficiency filters cannot
be washed, they must always be replaced when at
the end of life.
22
Cleaning the air quality sensor box and sensor
(page 6, picture 13)
NOTE: Clean every 1-2 months to maintain the
performance of the air quality sensor.
Ensure that the air quality sensor is kept clean and
unclogged for optimal performance of the unit.
It is natural for dust to accumulate in this area,
vacuuming of the sensor box inlet grill with a
vacuum cleaner that has a narrow nozzle/brush.
Cleaning the sensor: Open the sensor box inlet
grill with finger and clean the lens, inlet and outlet
with wet cotton swab. Use dry cotton swab to
remove any excess water from the sensor.
After having cleaned the sensor box, we
recommend to vacuum clean the filter at the same
time. (ref. page 6, picture 13:2)
23
The plastic parts of the unit should be cleaned
with an oil-free dry cloth. For stains on plastic
parts, use a slightly damp soft microfiber cloth to
gently rub against the stain.
(ref. page 6, picture 14).
24
The area around the air inlet on the bottom of
the unit may accumulate more dust than some
other parts and hence may require more frequent
cleaning to ensure optimal performance. The
filter is equipped with a mesh filter and should
occasionally be wiped off or cleaned with a
vacuum cleaner to avoid loss of performance.
www.aeg.com
STORAGE
25
If you are not planning to use the appliance for
a long time, cover it with plastic or return it to its
carton.
NOTE: The multi-layer filter can not be washed, it
can only be replaced.
CAUTION!
Do not touch the fan blade when removing the
multi-layer filter.
9