AEG Pure 3000 Manual page 12

# ISSUE
8 The filter
icon is lit,
even though
I recently
changed the
filters
9 I am unable to
connect the Air
purifier to the
App
10 I have another
issue not listed
here OR none
of the above
steps have
helped resolve
the issue
12
TROUBLESHOOTING
After having changed the filter, long press the MODE
button for 3 seconds and the filter indication will be
reset.
If you are unable to onboard the unit and connect it to
the AEG App after a couple of attempts following the
steps in the AEG App and FAQ, then please contact an
AEG authorized service center for support.
You can search for more troubleshooting and FAQ
guides on our website OR the AEG App under the
product information pages, or directly contact AEG
authorized service center for support. Thank you!
NOTES
It is important to turn
OFF the unit before
changing the filter,
in order to reset the
product.
The WiFi chip in the unit
operates only at 2.4Ghz
so please ensure your
home WiFi is operating at
this bandwidth.
Please have the
unit's PNC and serial
number available when
contacting the AEG
service. This information
can be found on the
rating label which is
located on the bottom of
the unit.
www.aeg.com