Advertisement
Specifications
Recording system
Frequency response
Power output (DC)
Input
Output
Power requirements
| Where purchased
| United Kingdom
1
| United States
2-track 1-channel monaural
200-8,000 Hz (For normal
tape TYPE !)
Speaker: 350 mW (at 10%
harmonic distortion)
Microphone input jack
(minijack) sensitivity 0.2mV
for 3kQ or lower impedance
microphone
Earphone jack (minijack) for
8— 300 ohm earphone
3V DC, two size AA (R6)
batteries
DC IN 3V jack accepts:
* Sony AC-D2M AC power
adaptor
Operating voltage
240 V AC, 50 Hz
|
120V AC, 60 Hz
|
© Sony DCC-70 car battery ,
cord (optional) for use on
12 V car battery
Battery life
(hours)
Batteries
Recording
Sony batteries SUM-3 (NS)
Approx. 2.5
| Sony alkaline batteries AM3 (N)
Approx.
7
Dimensions
Weight
Accessory supplied
Approx. 91 x 119.2 x 39.7 mm
(wih/d)
(35/5 x 4°/, « 1 °/, inches)
incl. projecting parts and
controls
Approx. 310 g (11 02) incl.
batteries
Carrying case (1)
Optional accessories
AC power adaptor
AC-D2M
Car battery cord
OCC-70
One point microphone
ECM-202
Electret condenser microphone
ECM-K7. ECM-K8,
ECM-011, ECM-D5
Foot switch
FS-10A
Monaural earphone
ME-81, ME-L82
Connecting cord
RK-G64, RK-G69
Your dealer may not handle some of the above listed
optional accessories.
Please ask the dealer for detailed information about the
optional accessories available in your country.
Note
Use only the recommended AC power adaptor or car
battery cord manufactured by Sony. Polarity of the
plugs of other manufacturers may be different.
On:
ae
4
Polarity of the Sony plug
Design and specifications subject to change without
notice.
Note: This appliance conforms with EEC Directives
76/889 and 82/499 regarding interference suppression.
Advertisement
