Specifications - Sony WALKMAN TCD-D7 Operating Instructions Manual

Specifications
eee)
Tape Digital audio tape
Recording time Standard: 120 minutes
Long-play mode: 240 minutes
(with DT-120)
Sampling frequency 48 kHz, 44.1 kHz, 32 kHz
Frequency response Standard: Fs 48 kHz 20 - 22,000 Hz (41.0 dB)
Fs 44.1 kHz 20 - 20,000 Hz (+1.0 dB)
Fs 32 kHz 20- 14,500 Hz (11.0 dB)
Long-play mode: Fs 32 kHz 20 - 14,500 Hz (11.0 dB)
Signal to noise ratio Standard: more than 87 d8
Long-play mode: more than 87 dB
(1 kHz IHF-A, 22 kHz LPF, LINE IN)
Dynamic range Standard: more than 87 dB
-play mode: more than 87 dB
(1 kHz IHF-A, 22 kHz LPF, LINE IN)
Total harmonic distortion Standard: tess than 0.008% (1 kHz, 22 kHz LPF, LINE IN)
Long-play mode: less than 0.09% (1 kHz, 22 kHz LPF, LINE IN)
Wow and flutter Below measurable limit (less than +0.001% W.PEAK)
Input ETS — —
ae — aw
LINEN
Output [Jack ype | Impedance Maximum output level
I
PHONES/ LINE OUT PHONES LINE OUT
LINE OUT 500 mV SmW+5mW
more than 10 kilohms
PHONES
32 ohms
ee We REMOTE jack (special jack)
Digital input/output, remote contro! operation and timer-activated operation is possible by
connection with an adaptor kit to this jack.
Power requirements + DC 6 V four size AA (LR6) batteries
+ OC IN 6V jack accepts:
the ok ag power adaptor AC-E60AM or AC-E60L (not supplied) for use on 120 V
AC, 60
the car battery cord DCC-E160L (not supplied) for use with 12 V car battery or
DCC-E260HG (not supplied) for use with 12V/24V car battery.
Battery life (when the Playback: approx. 3.5 hours
illumination for display Recording: approx. 3 (4**) hours
window is off)* * measured at 20°C.
++ when the headphones or active speaker system is unplugged from the PHONES/LINE
OUT jack
Power consumption 12W
Dimension Approx. 132.6 x 36.7 x 88.2 mm (51/4 x 11/2 x 31/2 in.) (w/h/d) not incl. projecting parts
and controls
Mass Approx. 500 g (1 Ib. 102.) incl. batteries