Kenwood KDC-9011 Instruction Manual page 35

Press the FM button to change the setting number of times
higher, and press the AM button to change it lower. Settings
may be made from 1 to 3.
4 Press the MENU button to end the menu mode.
The "#" display in the Manual Open Switch Setting mode will
differ depending on the setting. The initial setting value is "1".
*' KDC-9011/X811
"? KDC-X711/8011/7011
Black Mask
This function allows you to turn off the lower part of the
display if there is too much information in the display.
Turning the Black Mask On/Off:
1 Press the MENU button for at least one second, —
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the ®1 button until the Black Mask function
appears in the display.
Pressing the ke button results in the functions being switched
in the reverse order.
The function setting is indicated by "BLK MASK ON* or "BLK
MASK OFF' in the display, indicating that the Black mask is on
or off, respectively.
"BLK MASK ON' (The display will turn on by using only the the
* ATT indicator and the part for Setter display.)
*- KDC-X711/8011/7011
"BLK MASK OFF" (The display will turn on by using the whole
part of the display.)
3 Switching settings
Press either the AM or FM button.
The display and setting will change. -
4 Press the MENU button to end the menu mode.
Function of the KDC-9011/KDC-X811
Dimmer level adjustment
You can adjust the Dimmer level of the unit separately when
your car's light switch has been turned on or off.
To adjust the Dimmer level:
1 Press the MENU button for at least one second.
"MENU is displayed and the menu mode is turned on.
2 Keep pressing the PI button until the Dimmer level
adjustment function appears in the display.
Press the <@ button to search in the other direction.
The function setting is indicated by "Bright ##° in the display,
indicating that the Dimmer level adjustment mode is on.
3 Switching settings
Press either the AM or FM button.
Press the FM button to change the setting values higher, and
press the AM button to change them lower. Settings may be
made from 0 to 10.
4 Press the MENU button to end the menu mode.
The *##" display in the Dimmer level adjustment mode wiil differ
depending on the setting. The initial setting value while your car's
light switch is turned on is "5", and while the light is turned off is
"10".
— 35 —