To change the direction of opening of the clear
door
1. Unplug the dryer.
2. Open the door.
G)Remove the contact pin at the upper part of the
door with a spanner. Turn the contact pin 90° and
take it out.
4. Unscrew the 2 screws at the door hinge and remove
the door.
6) Unscrew the two screws above and below the door
lock system and remove the plate.
©)To remove the door lock:
e Press the hook at the upper part down with a screw
driver, pull it forward and take the lock system out.
7. To change the door opening:
e Turn the door.
¢ Re-fit the door with the 2 screws at the preferred
position.
e Hang the door lock system at the opposite side of
the door and latch it.
e Fix the plate with the 2 screws above and below the
door lock system.
8. Replace the contact pin in the top of the door.
To change the direction of opening of the non-
clear door
1. Unplug the dryer.
2. Open the door.
@) Remove the contact pin at the upper part of the
door with a spanner. Turn the contact pin 90° and
take it out.
4. Unscrew the 2 screws at the door hinge and remove
the door.
()To remove the door lock:
Unscrew the two screws above and below the door
lock system and slide it upwards (1,5 cm) holding it
from the bottom. Remove it.
6. To change the door opening:
Turn the door.
Re-fit the door with the 2 screws at the preferred
position.
Insert the door lock system at the opposite side of
the door and move it (1,5 cm) down.
e Fix the 2 screws above and below the door lock system.
7. Replace the contact pin in the top of the door.