Bauknecht TRA 61260 Quick Reference Manual

GB TRA 61260
QUICK REFERENCE GUIDE
Please also carefully read the
"Instructions for Use".
Very Wet Load
Wet
Load
Load
Indicative
Kg
drying times Fabric Drying
Cycles
(in minutes)
& Drying levels
95' 80' 3.0
160' 130' 6.0
Cotton
80' 60' 3.0
130' 110' 6.0
max 6 kg
60' 50' 3.0
110' 85' 6.0
25' 20' 1.0
Synthetics
40' 35' 2.5
20' 15' 1.0
max 2.5 kg
35' 30' 2.5
Delicate
70' 55' 2.5
max 2.5 kg
Airing
- - -
Time
- - -
* Test programmes according IEC 61121.
Drying options
Cupboard dry plus
Cupboard dry *
Iron dry *
Cupboard dry *
Iron dry
Low drying intensity for delicates
and garments labelled
Laundry is aired and refreshed for
30 minutes without heating.
Completes drying or dries single
items (suitable for all fabrics).
Dryness
Gentle
Adjustment
Reduces drying
(Adjusts Dryness
intensity
(recommended for Level according to cycle at Intervals
wishes)
delicate items)
-
- -
- -
Buzzer
Signals/Sounds
end of drying
Start
Starts the drying cycle. The
Pause
Start/Pause indicator lamp is
blinking during the selection
phase.
Press to confirm the final
selection.
Turn the programme selector knob
Programme
to the desired programme. The
selection
indicator next to the programme
name lights up. The start indicator
blinks to show, that the dryer is in
selection mode. After the Start /
Pause button is pressed the start
indicator lamp lights up and the
programme starts.
Dryness adjustment is an option to
adjust the dryness of the laundry
according to your wishes. Select the
desired programme and the option
Dryness
dryness level adjustment by
Adjustment
pressing the button "+" for more
dry or the button "–" for more
humid. The selected dryness will be
stored as a pre-setting to the
selected drying programme. Using
the drying programme next time
the pre-setting appears. By pressing
the dryness adjustment buttons '+'
or '–' the pre-setting can be
changed.
The indicator lamp lights up when
Filter
the filter needs cleaning. Clean the
filter at the end of every cycle.
PROGRAMME SEQUENCE INDICATION
End
The programme sequence is
indicated by lamps, switching
on when programme step starts
and and switching off when the
programme step is passed.
5019 407 00493