Advertisement
1. Select the programme and the options as
indicated in the table (see Programme
table).
2. Options (If available)
To select an option, press the corresponding
button before pressing the START button. The
indicator above the button lights up to confirm
that a selection has been made. An alarm
sounds to indicate that an incorrect selection
has been made (incompatible options).
Press the button again to cancel the option.
Delayed starting
Delays dryer starting. Every time the push
button is pressed the start is delayed by an
hour. Can be set to a max. of 9 h. When
the required delay time has been set press
START. If the dot in the display flashes the
delayed starting is running. The count down
is displayed. The delay can be changed or
cancelled by selecting ,,0O".
Opening the door stops the count-down.
Close the door and press the START button
again to continue the count-down.
** Gentle
Reduces the drying intensity. Suitable for
delicate articles.
3% Plus
Lenghtens the drying time for heavy laundry.
\® Rapid (Cottons only)
Shortens the drying time (e.g. cloths or other
laundry of equal size). Do not use the option
for large items (e.g. sheets or similar). Max.
3.5 Kg.
Q Buzzer
Pressing the option initiales the buzzer
signal the end of the cycle at regular
intervals.
2% Anti-crease protection
lf you have pressed this button and do not
take the laundry out of the drum at the end
of the drying cycle, an anti-crease cycle
operates: the drum turns at regular intervals
for 12 hours stopping the laundry from
becoming wrinkled. If the option is selected
with ,,Delayed Start" the cycle operates
both before and after the drying cycle.
N.B. If you do not press this button the anti-
crease cycle is reduced to 60 minutes. If the
buzzer is selected it will give a signal at regular
intervals to remind you take the laundry out.
6 Inside lamp
On pressing this button a light comes on
and lights the drum for 30 seconds.
Programme Sequence Indication
When the drying cycle has been started
these leds indicate the ,,cycle status".
1. Having selected the desired programme
and options, push the START button.
2. At the end of the programme a buzzer sounds
to signal the end of the drying cycle.
If you have selected the buzzer option,
it will sound at regular intervals for some
time.
3. lf you do not unload the clothes at the end of
the ee ae cycle, an automatic anti-crease
cycle
will operate Tor maximum 20
minutes: the drum rotates at regular intervals
preventing the clothes from creasing.
4. At completion of the programme, set the
programme knob to position "0". The
"Machine on" light goes off.
5. Clean the lint filter and empty the water
container after every drying cycle.
6. If you change the programme during the
drying cycle the dryer stops. To operate the
new programme press the START button
again.
Note: To interrupt the machine set the time selector
knob to position a and press Start again. Wait
some minutes to open the door.
For your safety the programme stops automatically
if you open the door. To restart select the
programme, and press the Start button again.
Advertisement
