Bauknecht TRK 67200 Quick Reference Manual

GB TRK 67200
QUICK REFERENCE GUIDE
Please also carefully read the
"Instructions for Use".
Very Wet Load
Wet
Load
Load
Indicative
Kg
drying times
Fabric Drying
Cycles
(in minutes)
& Drying levels
95' 80' 3.0
135' 110'
5.0
Cotton
80' 60' 3.0
110' 90'
5.0
max 5 kg
3.0
60' 50'
90' 70' 5.0
25' 20' 1.0
Synthetics
45' 35' 2.5
20' 15' 1.0
max 2.5 kg
35' 25' 2.5
Delicate
30' 20' 1.5
max 1.5 kg
Airing
- - -
Time
- - -
* Test programmes according IEC 61121.
Drying options
Cupboard dry plus
Cupboard dry *
Iron dry *
Cupboard dry *
Iron dry
Especially for delicate items
(e.g. shirts).
Laundry is aired and refreshed for 30
minutes without heating.
Completes drying or dries single
items (suitable for all fabrics).
Gentle Dryness
Adjustment
Reduces drying
intensity (Adjusts Dryness
(recommended for Level according to
delicate items) wishes)
-
-
- -
- -
- -
Start
Starts the drying cycle. The Start/
Pause
Pause indicator lamp is blinking
during the selection phase.
Press to confirm the final
selection.
Buzzer
Signals/Sounds
end of drying
Turn the programme selector
cycle at Intervals
knob to the desired programme.
Programme
The indicator next to the
selection
programme name lights up. The
start indicator blinks to show,
that the dryer is in selection
mode. After the Start / Pause
button is pressed the start
indicator lamp lights up and the
programme starts.
Dryness adjustment is an option
to adjust the dryness of the
laundry according to your wishes.
Select the desired programme
and the option dryness level
Dryness
adjustment by pressing the
Adjustment
button "+" for more dry or the
button "–" for more humid. The
selected dryness will be stored as
a pre-setting to the selected
drying programme. Using the
drying programme next time the
pre-setting appears. By pressing
the dryness adjustment buttons
'+' or '–' the pre-setting can be
changed.
The indicator lamp lights up when
Filter
the filter needs cleaning. Clean
the filter at the end of every
cycle.
PROGRAMME SEQUENCE INDICATION
End The programme sequence is
indicated by lamps, switching
on when programme step
starts and and switching off
when the programme step is
passed.
5019 407 00134