Advertisement
1. Worktop
2. Condensation water container
3. Contact pin
4. Door . (Door opening can be reversed).
See "Door reversibility" section.
To open the door: pull the handle out.
To close the door: push the door gently until it
closes.
5. Lint filter
6. Child safety-lock
6a. For dryers with clear door:
¢ To activate turn the plastic screw counter clockwise
until it snaps in.
6b. For dryers with non-clear door
e The child safety is near the door lock (in the
illustration on the left of the aperture).
Operating principle:
Using a coin or a screwdriver turn the plastic screw
clockwise by: 90°. The door cannot be locked.
7. Inside lamp (if provided)
Only comes on when the door is open (the programme
has to be selected) .
Light off: the programme selection button is set to
bee
8. Push-button for heat exchanger flap
9. Heat exchanger
Filter
After every use clean the fluff filter.
1. Pull the filter upwards.
2. Brush lint using a soft brush or your fingertips.
3. Push it back well into place.
Filter Warning Indicator
It warns that the filter is dirty and needs to be
cleaned.
If the laundry is insufficiently dry check that the
filter is not clogged.
1. Open the flap pulling gently to the left and
remove the water container to empty after
every drying cycle.
2. Open the lid and empty the container.
3. When emptied close lid tightly and push
container back into housing until it clicks.
12
Water container indicator
indicates that the water container is full and the
drying programme is automatically stopped.
Empty the water container and restart the
programme by pressing the START button.
Advertisement
