Change Programme And/Or Options After Programme Start; Reset A Running Programme Before The End; Form Clear; Suggest Drum Clean - Hisense XQG70-HR1014 Customer Service Manual

Customer Service
Turn the programme selector to the "Off"position.
Close the water tap.
Open the door and unload the machine.
Leave the door open to allow the drum to dry.

Change programme and/or options after programme start

Press the "Start/Pause"button to pause the programme.
Select the new programme (with temperature),any options and another spin
speed if you want.
Press the "Start/Pause"button again. The new programme continues at the
same position where the previous programme was interrupted.Do not add detergent
for this programme.

Reset a running programme before the end

The "Reset"button cancels a programme before the end.
Press the "Reset"button for at least 3 second.
Any existing water is drained out before the door can be opened.

Form clear

Press the "Form Clear"button before the prohgramme start,when the last
rinse ,the machine can adjust the level and the strength of the water to clear the foam
remain.

Suggest drum clean

After every 50whole cycles, the indication light"
select"Drum Clear"programme to clean the drum.
"light up until the user
Version 1