Delay End; Programme Start; Reload In Process - Hisense WFMB6010EM User's Operation Manual

Prewash
Select the function to conduct pre-wash so as to enhance washing effects and better
remove stains. This function is suitable for heavy dirt clothes.
Before inflowing, laundry detergent/ washing powder can be added to pre-wash box, and
main wash box must be added with washing powder.
Spin
The programme defaults to the partial max. spin speed.
Press buttons to select other spin speeds.
If spin speed " 0 " selected, the last spin process will be canceled and the
machine only dewaters before the end of programme.
Temp.
Each programme is corresponding to its default temperature. If needed, press
"Temp." button to adjust.
Extra rinse.
After set the function of rinsing adding, the program runs the rinsing process once again
before running the softening, and the total running time of the program increases
accordingly.

8.3 Delay End

Delay function allows to run the machine at the consumers' convenience, for
example, at night when electricity is cheaper.
Select programme, temperature and options.
In standby mode, press and hold "Temp."+"Spin" to enter or cancel the Delay
end mode, press "Temp." to reduce the reservation time, and press "Spin" to
increase the reservation time. After reservation function is selected, "Temp."
and "Spin" can no longer change the program slave parameters. Each time
the key is pressed, time changes for 1 hour.The delay time must be longer
than the wash program length as the delay time is the time program will
finish. For example: if the selected program time is 00:28, the delay time
selected must be between 01:00 and 24:00.
When the reservation process is operated, the icon of 'reservation time' will be on. When the
reservation process is finished, the icon of 'reservation time' will be off, while the icon of the
'remaining time' will be on.
To cancel Delay End, turn programme selector to another programme position,
before pressing "Start/Pause" button.

8.4 Programme Start

Switch on and select programme required and corresponding function keys, then
press the "Start/Pause" button to run the programme.

8.5 Reload in process

Press "Start/Pause" button to reload clothes in the process of washing.
If the door can be opened in the process, door lock indicator light will flashes. Until
door lock indicator turns off, you can open the door to load clothes.
21