Toro Z Master 7500-D Series Setup Instructions page 9

Dealer Initial Customer Initial
Note:
When you, the dealer representative, have finished delivering the machine to the customer, sign and
date in the space provide below and keep a copy of this page for dealer records. Also, the dealer must remind
the customer to use a full-width trailer ramp to load the machine.
Signature:
Signature:
Show the customer where the following features are located and how they function:
•
Fuel tank
•
Oil fill cap/Oil dipstick
•
Engine-oil filter
•
Engine-oil drain
•
Fuel gauge, valve and hose
•
Air filter
•
Radiator coolant (if applicable)
•
Hydraulic-fluid reservoir
•
Hydraulic filter
•
Battery
•
Key switch
•
Throttle lever
•
Choke (if applicable)
•
Power take off switch (PTO)
•
Motion-control levers
•
Parking brake
•
Height of cut
•
Lift-assist lever (if applicable)
•
Adjustable seat
•
Rollover Protection System (ROPS)
•
Deck-flow baffle
Refer to theOperator's Manual to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the Operator's Manual.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com
Ensure that the customer receives the Operator's Manual, engine owner's manual,
Setup Instructions, and operator training material.
Ensure that the customer knows the Parts Catalog is available at www.Toro.com.
Assist the customer in loading the machine using a full-width trailer ramp.
Date:
Date:
9
Check Procedure