Toro Z Master 7500-D Series Setup Instructions page 7

9
Checking the Machine Before Delivery to the Customer
(All Machines)
No Parts Required
Procedure
Before delivering the machine to the customer, ensure that you perform or have performed the procedures
listed in the following table and initial each when finished. Refer to the Operator's Manual for instructions on
performing these procedures.
Initial
When you finish setting up the machine, sign and date in the space provided below:
Signature:
Check the tire pressure.
Check the level of the machine.
Check that all spindles are greased.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check ROPS is secure.
On liquid cooled machines, check the level of the coolant in the radiator and overflow bottle.
Ensure that the machine tracks correctly; refer to the Operator's Manual for the adjustment procedure.
Check the safety interlock system; refer to the Operator's Manual.
Ensure that the PTO works.
Check all fasteners that you installed to ensure that they are tight.
Check Procedure
Date:
7