Environment - Samsung DV16T8520 Series User Manual

Heat pump dryer
Hide thumbs Also See for DV16T8520 Series:
Table of Contents

Advertisement

Available languages

Available languages

STEP 4 Check the installation
• All packaging material is completely removed and properly disposed.
• The dryer is level and standing firmly on the floor.
• Make sure no accessory remains inside the drum.
• Do not block the air inlet hole of the cooling grill at the front of the dryer.
• Do not place inflammable objects near the dryer and keep the surroundings clean.
• Do not remove the adjustable levelling legs of the dryer. They are necessary to keep the dryer level with
the ground.
• After installation, we recommend that you wait at least 1 hour before using the dryer.
STEP 5 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap
to turn on the
dryer.
NOTE
Run the Time Dry cycle for 20 minutes to make sure that it runs, heats, and shuts off. If the HC information
code is displayed, contact a local service center.

Environment

Please dispose of the packaging materials for this product in an "environmentally friendly" manner. For
further detail, please contact your local area authority.
English 23
DV8700TK_DV16T8520BV_DC68-04223Q-00_EN.indd 23
2021/6/23 15:51:22

Advertisement

Table of Contents
loading

Table of Contents